Plastic
Plastic is an organic material prepared out of resin. It may or may not contain fillers, plasticisers and solvents. Plastic may […]
Planning Suitable Orientation
Orientation means setting out the plan of the building with respect to north-south and east-west directions to provide an opportunity
Plastering
Applying mortar coats on the surfaces of walls, columns, ceiling etc. to get smooth finish is termed as plastering. Mortar used
Plans and Maps
As stated in the definition of surveying the objective of measurements is to show relative positions of various objects on paper.
Plate Domes
A dome is a three-dimensional structure generated by translation and rotation or only rotation of an arch rib. Thus a
Plastic Design
Structural steel members often have considerable reserve load-carrying capacity after yielding occurs, e.g., at the outer surfaces of a beam. For
Plastics Bibliography
American Concrete Institute, Polymer Modified Concrete, SP-99; Polymers in Concrete, ACI 548; and Guide for the Use of Polymers in Concrete,
Plaster and Gypsumboard Construction Terms
Absorption. The rate of absorption of water into gypsumboard, as determined by the test described in ASTM C473. Accelerator. Any material
Plaster Finishes
Prepared on the building site, plaster finishes are classified as wet-type construction. They take longer to complete than dry-type construction,