Architect
The term design professional is often used to refer to the architect and engineer as they perform their planning, design […]
The term design professional is often used to refer to the architect and engineer as they perform their planning, design […]
Arc welding may be done in the shop or in the field. The basic sheet-steel weld types are shown in Fig.
The term terra cotta has been applied for centuries to decorative molded-clay objects whose properties are similar to brick. The molded
A great variety of forms have been used for trussed or solid-ribbed arch brides. The following are some of the principal
These are advantageous for long bays, especially if large clearances are desirable along the center. Such braced barrel vaults have been
Increasing use of specialized types of construction not covered by building codes has stimulated preparation of special-use permits or approvals. Model
One method for approximating the influences of second-order effects (Art. 3.46) is through the use of amplification factors that are
Approximate Amplification Factors for Second-Order Effects Read Post »
Under the ICE conditions, Clause 66, either the employer or contractor can serve a Notice of Dissatisfaction on the engineer stating
To clarify requirements of the CDM Regulations the Health and Safety Commission (HSC) published an Approved Code of Practice and Guidance on
The following steps are required to solve accute shortage of reasonable low cost houses: 1. Development of Sites: Government and