Turning Tube Viscometer
The turning tube viscometer (Hopkins and Cabrera 1985; Ferraris 1999) is based on the same principle as the moving sphere […]
Turnkey
A turnkey contract is one in which the owner and contractor agree on a fixed contract sum for a contract
Truss Connections
Truss members generally are designed to carry only axial forces. At panel points, where members intersect, it is desirable that
Truss Components
Principal parts of a highway truss bridge are indicated in Fig. 13.1; those of a railroad truss are shown in Fig.
Truss Design Procedure
The following sequence may serve as a guide to the design of truss bridges: Select span and general proportions of
Truss Member Details
The following shapes for truss members are typically considered: H sections, made with two side segments (composed of angles or
Truss Joint Design Procedure
At every joint in a truss, working lines of the intersecting members preferably should meet at a point to avoid eccentric
Truss Bridges on Curves
When it is necessary to locate a truss bridge on a curve, designers should give special consideration to truss spacing, location
Trowel Test
The trowel test (Bartos 1992; Dobrowlski 1998; Bartos, Sonebi, and Tamimi 2002) is a nonstandard, subjective test to characterize the