The wet sieving stability test (EFNARC 2002; Bartos, Sonebi, and Tamimi 2002) was developed by a French contractor to measure […]
Wet Sieving Stability Test (GTM Screen Stability Test) Read Post »
(i) For abutment pier to be assigned as fixed pier while the bridge is quite long, the longitudinal loads due
What are the advantages of assigning the central pier and the abutment as fixed piers? Read Post »
Welds should be qualified and should be made only by welders, welding operators, and tackers qualified as required in AWS
Electric currents are generally used in either of two ways to joint cold-formed steel components, with electric-arc welding or resistance
The position of the stick electrode relative to the joint when a weld is being made affects welding economy and
Weldable structural steels permissible in buildings and bridges are listed with required electrodes in Tables 5.10 and 5.11. Welding electrodes
Designers and detailers should detail connections to ensure that welders have ample space for positioning and manipulating electrodes and for
General welding characteristics of the various types of ferrous metals are as follows: Wrought iron is ideally forged but may
Weldability and brazing properties of aluminum alloys depend heavily on their composition and heat treatment. Most of the wrought alloys can