Delay claims
The handling of delay claims often poses difficulties. Under the ICE conditions Clause 44, the engineer can give an extension of […]
Deformations in Beams
Article 3.18 presents relationships between a distributed load on a beam, the resulting internal forces and moments, and the corresponding
Description of Wind Forces
The magnitude and distribution of wind velocity are the key elements in determining wind design forces. Mountainous or highly developed urban
Design Aids and References
Design procedures using either the ASD or the LRFD specifications require the use of many numerical values which represent the section
Delivery-Chute Torque Meter
The delivery-chute torque meter (US patent 4,332,158; Wong et al. 2000) is designed to measure the consistency of concrete as
Delivery-Chute Depth Meter
The delivery-chute depth meter (US patent 4,578,989; Wong et al. 2000) is similar to the delivery-chute torque meter in that
Description of the bridge
The Confederation Bridge consists of two approach bridges at its ends and a main bridge between them (Fig. 1). The approach
Density of soil
The term density is used herein to denote the mass-to-volume ratio of a material. However, some references, particularly older ones,
Degradation of prestressed concrete Introduction
Most of the prestressed concrete structures built during the last 50 years, where design and construction have adhered to best
Degradation of prestressed concrete Introduction Read Post »