Supplementary protection against chlorides
The need for supplementary protection of reinforced concrete against the corrosive effects of chloride salts is far more common than […]
Summary of Strength Design Provisions of 2008 MSJC Code
Strength Loading Combinations from Sec. 1605.2.1 of the 2009 IBC Strength loading combinations from Sec. 1605.2.1 of the 2009 IBC are repeated
Summary of Strength Design Provisions of 2008 MSJC Code Read Post »
Summary of Allowable-Stress Design Provisions of 2008 MSJC Code
Allowable-Stress Loading Combinations from Sec. 1605.3.1 of the 2009 IBC Allowable-stress loading combinations from Sec. 1605.3.1 of the 2009 IBC are repeated
Summary of Allowable-Stress Design Provisions of 2008 MSJC Code Read Post »
Surveying Appendix B
Control stations B.1 What is a control station? The essence of a control station is a small mark set immovably
Surveying Worked example in transforming between ellipsoids
This example shows how the geographical co-ordinates of a station can be converted from one system to another, following the
Surveying Worked example in transforming between ellipsoids Read Post »
Surveying Worked example in setting out
The purpose of conducting a traverse of the type described in Appendix E would typically be to establish additional local
Structural Steel Shapes and Plates
Steels for structural uses may be classified by chemical composition, tensile properties, and method of manufacture as carbon steels, high-strength
Stub-Girders
The primary advantage of the stub-girder system is that it provides ample space for routing mechanical ductwork throughout a floor