Wind Protection
For practical design, wind and earthquakes may be treated as horizontal, or lateral, loads. Although wind and seismic loads may have […]
For practical design, wind and earthquakes may be treated as horizontal, or lateral, loads. Although wind and seismic loads may have […]
Wind loads are randomly applied dynamic loads. The intensity of the wind pressure on the surface of a structure depends on
The LCL flow test (Bartos 1992; Ferraris 1999; Bartos, Sonebi and Tamimi 2002) is very similar to the Angles flow
Wide-module joist construction, which is also referred to as skip-joist construction, is an approach to reduce form costs and develop longer
The AISC ASD specification permits allowable stresses due to wind or earthquake forces, acting alone or in combination with dead
From aesthetic point of view, an odd number of spans with a decrease in length in the direction of abutment
In whole circle bearing (WCB) the bearing of a line at any point is measured with respect to a meridian.
The two parties immediately concerned with the issue of variation orders and the handling of contractors claims are the engineer under
Based on the experiment conducted by the Building Research Establishment, it was shown that the corrosion resistance of galvanized steel
In BS8110, it states that secondary reinforcement should be provided for beams exceeding 750mm deep at a distance measured 2/3
What is the purpose of skin reinforcement for deep beams? Read Post »